• The roboTest L is a fully automated testing machine for metals and plastics. It can be used for tensile tests, flexure tests or tear growth tests (elastomers).
• Depending on the specimen dimensions and specimen surface, up to 480 specimens can be tested autonomously.
• The specimens to be tested are placed in a movable magazine table (X-axis). The gripper (Y-axis) removes the specimens from the magazine and conveys them to the testing machine where the fully automated test is run. Optional components including an ID scanner, cross-section measuring device, HOST connection, accept/reject feature, disposal gripper, and status indicator, complete the system.
• Manual tests can be performed as required by moving the specimen feeding system out of the way.
• Operator influences (hand temperature/moisture, off-center or angled specimen insertion, etc.) are eliminated resulting in high test-result reproducibility.
• Qualified laboratory staff are relieved of routine activities, allowing them to focus on more complex tasks.
• The automated testing machine can be used during idle times (lunch breaks and night shifts), which increases its full capacity and produces faster results.
• The testing system reduces the testing costs per specimen and typically pays for itself within one to two years.
• The system supports secure documentation and statistical long-term monitoring.
• Non-contact measurement of the extension and change in width with the videoXtens L (optional): The extension is measured on both sides of the specimen, since for a cold strip, for example, the material can flow unevenly on the two sides.

Download catalog for metal  HERE

Download catalog for Plastic  HERE