Robotic testing system roboTest I

• For automated impact tests on tempered metal specimens (Charpy) or PE/PP specimens (Charpy/Izod)
• Standard: ASTM E23, ISO 148, ISO 179, ASTM D256, ISO 180
• Metals are tested using the Charpy method to ISO 148 or ASTM E23 in a temperature range of -180 to +300 °C (optionally up to +600 °C). The robotic testing system can be used with a 450 joule (only semi-automated) or 750 joule pendulum impact tester.
• Plastics are tested using the Charpy method to ISO 179 or ASTM D6110, or optionally using the Izod method to ISO 180 or ASTM D256 in a temperature range of -80 to +100 °C. The roboTest I for plastics can be used with a 25 joule or 50 joule (HIT 25/50) pendulum impact tester.
• A maximum of 10 specimens are placed and tempered in the temperature conditioning and feed unit. There is no need for an additional temperature conditioning box. Optionally, you can use a temperature conditioning or feed unit with capacity to hold 21 specimens. For the fully automated version, additional non-tempered specimens can be placed in additional stacking magazines. The temperature conditioning device is then filled automatically from these magazines.
• Specimen slide carriers facilitate insertion and removal of specimens into/from the temperature conditioning device, either manually (semi-automatic version) or automatically (fully automatic version).
• After reaching the required temperature, the foremost specimen is pushed out of the temperature conditioning device into its test position, where it is automatically aligned and impacted. The impact test is performed within 5 seconds of removing the specimen from the temperature conditioning device.
• Optional components including a barcode reader (2D) and HOST connection complete the system.

Detail about specifications pls check here